Order By Phone – (800) 778-1540 or (636) 583-1608 – M-F: 8:00AM to 4:30PM (CST)
Bullet Pumps
Bullet BP12 Highhead Effluent Pump
22 GPM, 1/2 HP, 1 1/4" Discharge
The Bullet BP12 Highhead Effluent Pump is a mid-section screened pump ideal for high pressure/high head applications (including clean water, filtered effluent to an irrigation sprinkler, drip irrigation, mound system or any filtered application requiring high head or pressure.
Model BP-12: 12 gallons per minute
The 4" diameter Bullet Pump has a 1/2 HP oil-filled, 120-volt, continuous duty submersible motor and a 15-foot 3-wire, 1 phase ground cord.
Requires separate float switch to operate (SJE1001896)
Warranty
No Vault Pump Filter
The No Vault Pump Filter is used with high head submersible pumps to filter effluent before entering the pump for discharge to final disposal.
Fits Bullet High Head Effluent Pumps
Bullet Pumps
SepticTankParts.com is an independent seller of replacement septic system parts for numerous original manufacturers and the use of the names of the original manufacturers, their models, types, part number and other descriptive product information is only for the purpose of aiding customers in cross-referencing the appropriate SepticTankParts.com part.
WARNING: These products can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
The warning listed above is provided to California consumers to ensure compliance with California Proposition 65.