The Gast 0523 Rotary Vane Air Compressor is a rotary vane type compressor/vacuum pump used for 500GPD aerobic septic tanks. This pump can be used as a compatible replacement for Gast 0323, 0523, RV03, RV05, Thomas QR-0030 and QR-0050 units.

The Gast 0523 Rotary Vane Air Compressor pump includes an internal muffler and filter silenced for quieter operation, a thermal protector to protect the motor from overheating and burning out as well as an integrated foot support assembly to make mounting the 0523 pump easier.

*Thomas is a registered trademark of Gardner Denver Thomas, Inc.

The rugged Gast 0523 has a tough cast iron housing and sealed bearings providing a low maintenance and durable solution for just about any low pressure application.

Includes (1) thermal protector (1) internal muffler and filter (1) foot support assembly

Warranty

The Gast 0523 Rotary Vane Air Compressor comes with a 1-year manufacturer warranty.

The Gast 1023 Rotary Vane Air Compressor is a rotary vane type compressor/vacuum pump with an oiless operation, low maintenance, long lasting durable pump. The 1023 is a dual voltage unit which can be wired at 120V or 220V but comes pre-wired for low voltage.

The Gast 1023 Rotary Vane Air Compressor pump includes an internal muffler and filter silenced for quieter operation and a thermal protector to protect the motor from overheating and burning out.

The rugged Gast 1023 has a tough cast iron housing and sealed bearings providing a low maintenance and durable solution for just about any low pressure application.

Used in Nayadic and other systems.

Nayadic is a Registered Trademark of Consolidated Treatment Systems, Inc.

Includes (1) thermal protector (1) internal muffler (1) filter

Warranty

The Gast 1023 Rotary Vane Air Compressor comes with a 1-year manufacturer warranty.

The K478 Vane Kit is the compatible repair kit for Gast 0523 and 0323 oil-less models with internal filtration. The kit includes four vanes, one gasket, two internal filters and two o-rings. A new rebuild kit is recommended every two years.

Gast compressors provide many years of dependable service but due to continual wear over time some compressor components may need to be replaced in order to continue to provide the proper air flow. Instead of purchasing a new pump, you may need to just replace some internal components.

Vane Dimensions 1-1/4" L x 1-3/8" W

Vane Thickness 1/8"

The K479 Vane Kit is compatible for Gast models 1023 and 0823 Rotary Vane Air Compressors.

Gast compressors provide many years of dependable service but due to continual wear over time some compressor components may need to be replaced in order to continue to provide the proper air flow. Instead of purchasing a new pump, you may need to just replace some internal components.

Vane Dimensions 2" L x 1-1/2" W

Vane Thickness 3/16"

The K882 Vane Kit is the compatible repair kit for the Gast AT03 and AT05 Rotary Vane Air Compressors.

Gast compressors provide many years of dependable service but due to continual wear over time some compressor components may need to be replaced in order to continue to provide the proper air flow. Instead of purchasing a new pump, you may just need to replace some internal components.

Vane Dimensions 1-1/4" L x 1-3/8" W

Vane Thickness 1/8"

The K223 OEM Vane Kit is a repair kit used for Gast models 0822 and 1022 Oil-less Rotary Vane Air Compressors. Gast compressors provide many years of dependable service but due to continual wear over time some compressor components may need to be replaced in order to continue to provide the proper air flow. Gast recommends that vanes be replaced every 2 years. Always replace the entire set of vanes at one time.

Vane Dimensions 1-3/4" L x 1-1/2" W

Vane Thickness .184"

The K479 OEM Vane Kit for Gast 1023 Rotary Vane Compressor is used for Gast models 1023 and 0823 Rotary Vane Air Compressors.

Gast compressors provide many years of dependable service but due to continual wear over time some compressor components may need to be replaced in order to continue to provide the proper air flow. Instead of purchasing a new pump, you may need to just replace some internal components.

Vane Dimensions 2" L x 1-1/2" W Vane Thickness 3/16"

The K575A OEM Vane Kit is a repair kit for Gast 1423 oil-less models. The kit includes four vanes, one gasket, two internal filters and two O-rings. A new rebuild kit is recommended every two years.

Gast compressors provide many years of dependable service but due to continual wear over time some compressor components may need to be replaced in order to continue to provide the proper air flow. Instead of purchasing a new pump, you may just need to replace some internal components.

Vane Dimensions 2-1/2" L x 1-1/2" W

Vane Thickness .184"

The K882 OEM Vane Kit is the repair kit for Gast AT03 and AT05 Rotary Vane Air Compressors.

Gast compressors provide many years of dependable service but due to continual wear over time some compressor components may need to be replaced in order to continue to provide the proper air flow. Instead of purchasing a new pump, you may just need to replace some internal components.

Vane Dimensions 1-1/4" L x 1-3/8" W

Vane Thickness 1/8"

The FS-19P-100 Filter Assembly is for use with Gast R2103 Regenerative Blower.

The filter assembly includes an inlet air filter housing and a FS-19P Filter Element.

Includes FS-19P Filter Element

The FS-19P-125 Filter Assembly is for use with Whirlwind R5760 and R3105-12 Regenerative Blowers. Includes a FS-19P Filter Element.

The FS-19P-150 Filter Assembly is for use with Gast R4110-2 and R5125-2 Regenerative Blowers.

This filter assembly includes an inlet air filter housing and a FS-19P Filter Element.

The AC393 Orange Filter Element is a replacement for the AC432 assembly. This filter maximizes and protects the performance of the Gast pump. Recommended change interval is every 6 months.

The AC432 Orange External Filter Assembly is for Gast Rotary Vane models 0823 and 1023. Assembly includes one AC393 filter and a filter holder assembly. 10 micron filter and it is recommended the filter be changed every 6 months.

The AK510 Plastic Stem is the replacement end cap for Gast 23 Series Rotary Vane Compressors as well as the AT03 and AT05 models.

Replacement End Cap Assembly for Gast 0523, 1023, AT03 and AT05 Rotary Vane Air Compressors.

Includes One (1) endcap stem One (1) filter One (1) o-ring

The B343B External Gast Filter & Element is the complete external assembly for Gast models 0323, 0523, RV03, RV05, AT03 and AT05. Assembly includes (2) external filters, one filter stem and one end cap. It is recommended the filter be changed every 6 months.

The B344A External Felt Filter is the replacement part for Gast B343B External Filter Assembly. TWO REQUIRED per assembly for models 0323, 0523, AT03, AT05, RV03 and RV05.

Includes two (2) filters

t50 micron filters

The Internal Filter for Gast Rotary Vane Air Compressors requires two filters per pump. The AK524 filter element is used on oil-less models with internal filtration which include models 0323, 0523, RV03, RV05, AT03, AT05, 0823 and 1023. Annual replacement is recommended.

Include two (2) felt filters