Order By Phone – (800) 778-1540 or (636) 583-1608 – M-F: 8:00AM to 4:30PM (CST)
The Flagg-Air shaft style aerators are designed as replacement units for OEM aerators and aeration systems. The Flagg-Air septic shaft aerator is built to outperform the competition in design, quality and reliability. Flagg-Air Aerators feature low RPM with high CFM, fully enclosed continuous duty motor, pre-lubricated and sealed bearings, and powder coated steel brackets with rubber vibration restrictors for improved mounting stability and strength.
2 Year (non-pro rated) Warranty
The Flagg-Air® 340HT-J Septic Aerator is a brand-new, not refurbished, shaft-style septic aerator with 12” brackets designed specifically for use in Jet®* tanks as a premium OEM replacement for ALL Jet® aerator units (including models 660, 665, and 700LL), Alpha Air AL500-12 model, and model 735.
The Flagg-Air® 340HT-J Septic Aerator features a low RPM with high CFM, fully enclosed continuous duty motor with 2-foot power cord; pre-lubricated and sealed bearings; and a 7-amp mini breaker. This shaft-style aerator has a 304 stainless-steel aerator shaft, bronze coupler, and powder-coated steel brackets that have rubber vibration restrictors to provide improved mounting stability and bearing life. The Flagg-Air® 340HT-J Septic Aerator uses only high-impact plastic for the suds restrictor, aspirator, and the 3-in-1 T-Bar handle.
The distinguishing difference between the 340HT Series Flagg-Air® aerators is bracket size. The FA340HT-J is a Jet® septic aerator replacement with 12-inch brackets designed to fit the 10” diameter tank opening in Jet® aerobic septic systems. The FA340HT-N is a Norweco Singulair® ** septic aerator alternative with 14-inch brackets designed to fit the 12” diameter tank opening of Norweco Singulair® aerobic septic systems. Jet® septic aerators will be red and Norweco Singulair® aerators will be blue. Measure your tank opening to determine which aerobic septic system pump replacement to buy or call our Customer Service at (800) 778-1540 for assistance.
Every Flagg-Air® septic aerator includes a separate 7-amp mini circuit breaker to protect the motor. Installation of this mini breaker is required for warranty purposes. If you are replacing a Flagg-Air® septic shaft aerator, it is recommended to replace an existing 7-amp breaker with the new one that was shipped with your unit.
2 Year (non-pro rated) Warranty
The Flagg-Air® 340HT-N Septic Aerator is a brand-new, not refurbished, shaft-style septic aerator with 14” brackets designed specifically for use in Norweco Singulair®* tanks as a premium OEM replacement for ALL Norweco Singulair® aerator units (including models 96, 960, 206C and 780), Alpha Air model AL500-14, and model 735.
The Flagg-Air® 340HT-N Septic Aerator features a low RPM with high CFM, fully enclosed continuous duty motor with 2-foot power cord; pre-lubricated and sealed bearings; and a 7-amp mini breaker. This shaft-style aerator has a 304 stainless-steel aerator shaft, bronze coupler, and powder-coated steel brackets that have rubber vibration restrictors to provide improved mounting stability and bearing life. The Flagg-Air® 340HT-N Septic Aerator uses only high-impact plastic for the suds restrictor, aspirator, and the 3-in-1 T-Bar handle.
The distinguishing difference between the 340HT Series Flagg-Air® aerators is bracket size. The FA340HT-N is a Norweco Singulair® septic aerator alternative with 14-inch brackets designed to fit the 12” diameter tank opening of Norweco Singulair® aerobic septic systems. The FA340HT-J is a Jet®** septic aerator replacement with 12-inch brackets designed to fit the 10” diameter tank opening in Jet® aerobic septic systems. Norweco Singulair® aerators will be blue and Jet® septic aerators will be red. Measure your tank opening to determine which aerobic septic system pump replacement to buy or call our Customer Service at (800) 778-1540 for assistance.
Every Flagg-Air® Septic Aerator includes a separate 7-amp mini circuit breaker to protect the motor. Installation of this mini breaker is required for warranty purposes. If you are replacing a Flagg-Air® septic shaft aerator, it is recommended to replace an existing 7-amp breaker with the new one that was shipped with your unit.
The Flagg-Air 340HT Replacement Motor is the exact replacement for all Flagg Air 340 units. This model requires a 7 AMP mini breaker in the control panel
Warranty
This Flagg-Air 340HT Complete Shaft assembly is compatible with the 340HT-J Flagg-Air Aerator.
Includes an aspirator tip, stainless steel shaft, suds restrictor, and bronze coupler with set screw.
This Flagg-Air 340HT Complete Shaft assembly is compatible with the 340HT-N Flagg-Air Aerator.
Includes an aspirator tip, stainless steel shaft, suds restrictor, and bronze coupler with set screw.
The Flagg-Air 340HT/340HP Aspirator Tip is a replacement part for Flagg-Air 340HT/HP only and will not fit on other brand shaft style aerators.
The Flagg-Air 340HT/340HP Aspirator Tip is a replacement part for Flagg-Air 340HT/HP only and will not fit on other brand shaft style aerators.
Flagg-Air 340HT-J Bracket Set is built for use on HT and HP Series models. They are 12" diameter installed and fit in 10" opening for Jet riser.
Jet is a registered trademark of Jet, Inc.
The Flagg-Air 340HT-N Brackets are built for use on HP and HT series pumps they are 14" diameter installed and fit in 12" opening for Norweco-Singular riser.
Norweco is a registered trademark of Norwalk Wastewater Equipment Company, Inc.
Rubber Tips are used on Flagg-Air 340 and all other manufacturer's brackets requiring vibration dampers, sold in sets of 4.
If in need of rubber tips for upper and lower brackets, order two (2) sets for a total of 8 tips.
The Flagg-Air 340HT/340HP Suds Restrictor is specifically designed to fit only the Flagg-Air 340 Aerator models.
The Flagg-Air 340HT/340HP Suds Restrictor is specifically designed to fit only the Flagg-Air 340 Aerator models. The red suds restrictor is used on Flagg-Air Model J units which are used as Jet* replacements.
* Jet is a registered trademark of Jet, Inc.
The Flagg-Air 340HT/HP handle is a factory replacement part for the Flagg-Air 340HT/HP model J.
The Flagg-Air 340HT/340HP handle is a factory replacement part for the Flagg-Air 340HT/HP model N unit.
7 Amp Mini Circuit Breaker is used with the Flagg-Air 340-HP and HT Aerators and the Red Alert P101FA-2 Control Panel or for any aerators requiring a 7 Amp Mini Circuit breaker.
4 Amp Mini Circuit Breaker used with old-style Flagg-Air 340, Jet and Norweco (NOT Flagg-Air 340HP/HT). Check your control panel to verify the current circuit breaker size.
* Jet is a registered trademark of Jet, Inc. Norweco/Singulair is a registered trademark of Norwalk Wastewater Equipment Company, Inc.